Hard-wired
 

• Bright 177 candela strobe light to wake people who can’t hear audible alarms.
• Strobe light flashes approximately
• 60 times per minute.
• For 120V AC wired-in applications
• Quick plug-in connector, for fast, easy installation.
• Meets new UL standard and requirements of the Americans with Disabilities Act.
• Test button checks all detector and strobe functions.
• Can be interconnected with up to 12 identical units.
• Loud 85dB alarm
• UL approved
• Ten year limited warranty

Includes a Built-In Transmitter
The same unit as the Gentex 7100F but with a built-in transmitter that will work with any Silent Call receiver. This photoelectric type detector is audible-only but can be used with remote strobes (see link below). Unit is hard-wired in (you will need an electrician to hook it up).
 

Features include:

• 90dB solid state non-latching piezo horn
• Functional test switch—patented three position test
• Pulsing LED sensing chamber
• Solid-state LED condition indicator
• Tandem connection of up to six units
• Maintenance indicator
• Quick-disconnect wiring harness
• Mounting hardware adapts to standard junction boxes
• UL & ULC Listed

Hard-wired for Mounting to Wall, Battery Back-Up Included
All the same features and quality as the other Gentex smoke detector models (except w/battery backup). Battery backup operates audible alarm only. This is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. (This model is hard-wired so you would need an electrician to hook it up.)
 

Standard Features:

• 177 candela rating (very bright strobe light)
• Solid state 90dB horn (very loud)
• Full function test switch (easy for you to test that it is working)
• Flashes 60 times per minute
• Meets state, federal, and ADA requirements
• Quick-disconnect wiring harness
• Mounting hardware for wall
• Tandem connection up to 6 detectors per system
• UL Listed (USA)
• ULC Listed (Canada)
• One year warranty

Hard-wired for Mounting to Ceiling
The 710CSC is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. (This model is hard-wired so you would need an electrician to hook it up.)
 

Standard Features:

• 177 candela rating (very bright strobe light)
• Solid state 90dB horn (very loud)
• Full function test switch (easy for you to test that it is working)
• Flashes 60 times per minute
• Meets state, federal, and ADA requirements
• Quick-disconnect wiring harness
• Mounting hardware for ceiling
• Tandem connection up to 6 detectors per system
• UL Listed (USA)
• ULC Listed (Canada)
• One year warranty

AC-Powered
The 710LS is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. This model is AC-powered so you do not need an electrician to hook it up.
 

Standard Features:

• 177 candela rating (very bright strobe light)
• Solid state 90dB horn (very loud)
• Full function test switch (easy for you to test that it is working)
• Flashes 60 times per minute
• Meets state, federal, and ADA requirements
• Mounting hardware for wall mount
• UL Listed (USA)
• ULC Listed (Canada)
• One year warranty

To Be Used With Gentex 7100F, 7100FT, 710CSC, 710CSW, 7109CSC, 7109CSW
A remote signaler (intended for indoor applications only) which connects to the Gentex models listed above. Unit will mount on wall. (Also available for ceiling mount, see link below.) Two remote strobes may be used per smoke detector. Units must be installed by an electrician.
 

• Low current consumption
• 60 flashes per minute
• 177 candela rating
• UL Listed
• Two year warranty

Smoke Detector and Signal Unit with Sidekick Receiver
This smoke detector system is a wireless, single-function system which detects smoke and then transmits a signal within a 100 foot radius and uses Sidekick Receiver with strobe to warn or wake you up. (With vibrator option, notification is by vibration. Photo shown is with vibrator option.) System is easy to install, simple to use, and very portable.
 

This system includes the following components:

• Portable 6" audible 9 volt battery-operated smoke detector.
• Receiver unit that attaches to wall or sits on nightstand. Plugs into 110V outlet.
• Sidekick Receiver
• One year warranty on smoke detector.
• One year warranty on signal unit with Sidekick Receiver
• Five year warranty on smoke detector and vibrator.

A vibrator may be added to this system for customers who would like a Shake-Up system with Sidekick Receiver (strobe) and vibrator. A Dual Connector (SC-DC24) and a Vibrator (SC-VIT053195) is required for this option.

May be used with Silent Call Shake-Up System with Strobe (SC-SYS50012)and Gentex (GEN-710LS)
Plug the Silent Call strobe receiver into the battery back-up. If there is an electrical failure, the battery back-up automatically kicks on and will run the strobe for approximately 40 minutes. (Other systems will run for different amounts of time, depending on power usage needed.)
 

• Capacity 350VA/225 Watts
• 6 Power Outlets:
  3 Battery & Surge Protection
  3 Surge Protection Only
• Power Cord: 6 Foot NEMA 5-15P
• Dimensions: 17" x 7" x 2.7"
• Warranty: 2 year Comprehensive warranty including battery

Please Note: This unit may provide battery backup for other products but plugging additional items into it may lower the number of minutes the strobe will run on back-up.

Extra strobe receivers for the Lifesaver Carbon Monoxide Detector (see link below).

Features of Strobe:

• 120V AC3 wire interconnect
• Bright 177 candela light
• 1 HZ flash rate (60 flashes per minute)
• Multi-station capability—up to 24 devices
• Five year warranty
• Warning: This visual signaling device has no detection means and must be used in conjunction with operating alarms. Disconnecting or loss of AC power will render this signaling device inoperative.

This carbon monoxide detector is easy to set up–just plug it in! The Macuro Gas Detector is a 110 volt carbon monoxide detector which comes with a transmitter. When the detector is activated it will activate the transmitter that is hardwired into it (model SC-14A896T). When using the model with the transmitter, your personal receiver will alert you to carbon monoxide in the area. You will need a Silent Call receiver for this system (see links below). One year warranty.